New Profile Posts

  1. mike mooney
    mike mooney
    Hello! 1st post. Bought my 2nd ‘66, 22 yrs between. OG 289 now w/a 351C I think. Need left door jamb latch panel. Any thoughts?
  2. justgoodenough
    justgoodenough
    Thanks for the add. I am finalizing the purchase of a 63 ranchero. With that, I will be looking for advice and likely parts. Pic to come.
  3. Rowen L Love
    Rowen L Love Cudino
    I have a dr appt today at 1 so anytime after that this week will be workable. About a 2 hr drive so earlier is better but whatever works for you is fine. Thanks
  4. Rowen L Love
    Rowen L Love Cudino
    Wade, you have no idea how happy I am to be getting this bumper! 66-67 rear bumpers for these are like finding hens teeth. As far as condition goes the pics tell me it's perfect for.my application. Take care, have a great day, stay kool, stay out of the smoky air(bad here) and I look forward to meeting you
  5. Rowen L Love
    Rowen L Love Cudino
    Wade, you are to kind. I will look for your msg with anticipation! Tell me, do you wear car theamed "T's"? If so, what size? And do you prefer long or short sleeves?
    1. Cudino
      Cudino
      Hi Rowen, that’s very kind of you. Please don’t go out of your way, it really is my pleasure to help, I’m glad these parts are going to good homes. But all of my T-shirts are indeed car-themed, large with short sleeves. I just wish this bumper was in even better condition. -Wade
      Sep 8, 2020
  6. Rowen L Love
    Rowen L Love Cudino
    Man, this is just great! Send me an address and a date and time and I'll be there! Also I will be happy to pay a reasonable price. Just let me know. Again THANKS!
    1. Cudino
      Cudino
      Will do. It’s too hot to do anything today, but I’ll pull it off in the next couple days and send you an update when it’s ready. And no charge, my pleasure to help, thanks for asking.
      - Wade
      Sep 7, 2020
  7. Rowen L Love
    Rowen L Love Cudino
    Hi, my name is Rowen Love. I saw in your add for the parts car you still have a rear bumper. I'm just outside Sacramento and I could come pick that thing up anytime as I am retired. If it is still available I would be VERY intrested. Thanks PS: I also posted this on your add. I too am new to this forum so please forgive me if this is redundant.
    1. Cudino
      Cudino
      Hi Rowen, you mean you want the rear bumper, right? Sure, it’s yours if you want it. I’ll pull it off and bring it to my office in Santa Clara, you can pick it up at your convenience if that works for you. It’s too bad, turns out I was just in Sacramento on Saturday, I could have brought it up for you.
      - Wade
      Sep 7, 2020
  8. Master Blaster
    Master Blaster Cudino
    Hi Wade, That sounds good. I will call you tomorrow if that is ok i am 3 hours ahead of so what would be a good time or you can call me @ (386) 466-6628 any time after 8:00 am EST.
    Thanks Don
    1. Cudino
      Cudino
      Hi Don,
      I’ve got a meeting until about 10am my time tomorrow morning, but maybe I’ll call you after that? About 1pm your time.
      - Wade
      Sep 1, 2020
  9. Cudino
    Cudino Master Blaster
    Hi Don,
    I hope this is the right way to send you a PM. I heard back from my transport friend Pat, he said the transport cost would be between $1900 and $2K dependent on how far down Florida you are towards Miami. If this is of interest to you I'll send you Pat's contact info. And if you'd like to contact me that's fine as well.
    - Wade
  10. Kiwirancher
    Kiwirancher Cudino
    Hi Wade , thanks for that , and the offer . My 66 is my daily driver and there is not really anything else I need. It would not be viable to send anything much bigger than the wiper knob really but thanks again for the offer. If I lived over there I would take the whole thing if I was close enough !
    Denis.
    1. Cudino
      Cudino
      No problem at all! I’ll send it out on Monday.
      - Wade
      Aug 29, 2020
    2. Cudino
      Cudino
      Hi Denis, your knob went out today via UPS, your tracking number is 1ZF775990490247510. Not sure how long it will take, but at least it's in transport. My pleasure to help!
      -Wade
      Aug 31, 2020
  11. Kiwirancher
    Kiwirancher Cudino
    Hi Cudino , yes that is the one I need . At the moment I have 2 wash ones there. My address is : Denis McLean , 31 Fisher Place , Lytton West , Gisborne 4010 , New Zealand . Hope postage isn’t too much of a killer. Let me know if it is.
    Thanks , Denis.
    1. Cudino
      Cudino
      Hi Denis, sounds good, and the postage will be no problem at all. Is there anything else you need? Nobody has spoken up yet to take the car so if there are any other bits and pieces you’d like I’d be happy to help. - Wade
      Aug 29, 2020
      Kiwirancher likes this.
  12. lovejoy
    lovejoy
    RED 1978 GT 400/C6/2.75
  13. HappyFlappy
    HappyFlappy
    I bought my 73 ranchero on August 8th of 2020, it has (as of now) a 351 cj with mismatched heads. I am a musician, tenor sax/ bass guitar
  14. HappyFlappy
    HappyFlappy
    I have a yellow and black 73 ranchero with a 351 cobra jet. It’s called “Bumblebee” or the “War wagon.”
  15. FAST EDDY
    FAST EDDY
    Now to figure out how to put pics in the actual post. Need help with this one. Lol
    1. PonyExpressRider
      PonyExpressRider
      Save your pictures as a .jpeg. That will usually put them below the 1MB limit. If not, a photo editor program will be needed to resize the pictures. Videos can be save in Youtube, and the links saved in your posts. I use Publisher to edit my Pictures. If you are using a Windows product on your computer, it most likely came with a Picture software on it.
      Aug 3, 2020
  16. FAST EDDY
    FAST EDDY
    Hello all. Still trying to figure out how to put pics up here.
  17. Slidemonster
    Slidemonster
    Living the Dream.... one day at a time.
  18. Mark R
    Mark R
    Living in the past....
  19. NHERIC
    NHERIC Jeff B.
    Hi Jeff....
    Your Ranchero looks awesome..
    Is the exhaust manifold stock or did you find headers that worked or know anyone with 77-79 302 that does.
    Thank you,
    NHERIC
    1. Jeff B.
      Jeff B.
      Thanks! My engine is a 400M. Headers are Hooker Super Comps which are horribly expensive but the only ones I could find years ago that would fit. I would think you should be able to find others that would fit your 302 that are more reasonably priced. Go with ceramic coated if you can fit that into your budget. No rust.
      May 25, 2020
    2. NHERIC
      NHERIC
      Hi Jeff...
      To date those are the only ones I can find that fit #7400HK...$650-$950..probably the same as yours as the 351 & 400 exhaust ports are up higher than 302.I've sent back 3 sets...
      I wondered if anyone tried a Mustang application that is close to block and sweeps back over steering box....starter.
      Pass this on to anyone with 77-79 you know. I'm not smart enough yet to post to the group. LOL
      NHERIC
      May 25, 2020
  20. Bossman
    Bossman
    Brand new ,I’ve got a 73 with351 Cleveland