Thirteenth Southeastern Ranchero USA Round Up

MORE FREE MOONSHINE , yes sir >>>>>>....

 

Im interested. When is it?

 

Maybe I can talk Andy into a mini Ranchero-train up there.

 

For now, save me a spot. Im gonna research renting a small camper to tow behind it.

 

Need my creature comforts. Back when I was 20, or even 30, sleeping in the bed would have been fine. Nowadays, forget that noise!

 

This is on my radar! but not this year!

 

I would love to show up again, due to current back surgery , i wont even attempt the thought of going

 

My compression test revealed a spread from 115 to 150. I think I will be spending my time rebuilding my 289. Looks like some bad exhaust valves, but while im in there might as well do the full meal deal: rings, bearings, oil pump, etc. along with the heads. My wife has been asking me why I didn't immediately rebuild the motor as soon as I bought the car since every other car I have bought a full rebuild was always step 1. I figured with just over 50K original miles it would last another 40K, give or take. Not so.

Needless to say I wont be there this year. Sorry Dennis.

 

So if you want to come all the way down and help build my motor instead of all that fun at the roundup...... C'mon!

 

Save me a space I am trying to finish my restomod 69. to bring Rebuilding C-6 and some electricals as interior lights.(can't find constant 12v-harness been chopped up)-gas gauge(registers 1/2 full when filled up) reinstall my oem fm/am,: speedo reads way slow-20 at act 35 ???. I may bring left over parts as at 83 I'm done restoring. So I need to sell all my parts, some astd chrome, dash pods, clamps/brackets, nuts/bolts screws and a bed cover, pass. door and on and on. I am in Jasper, Ga., 25 mi from Dawsonville. I may be in mood to sell Ranchero by then. It has an awesome 1964,427 (now 455) traction bars, near new wimbleton white, new black reflective C stripes , black vynl top, black int. console shift, black Pontiac recaro type leather seats (both 9 way pwr w/button panel mounted in console where ash tray was).Bed has bamboo flooring strips mounted in all groove insets and on tailgate. The bamboo in the bed floor is a one piece lift out grid screwed together. I get a ton of good comments. I have not reinstalled the factory a/c but have all the parts. I also have lots of 80/90s NOS Ranger parts, 80s fox Mustang NOS parts. As close to Dawsonville, I may just bring truck and let anyone interested in the rest, come to Jasper. My cell is 770-617-0263, Don Perry. Lots of you coming from west and north may come thru Jasper on hwy 53

 

It did a lot more than just that. What a mess.