The only part numbers on any of the instrument cluster parts (bezel, housing, faceplate, plastic face, gauges) were on the gauges; one set had...
That makes a lot of sense to me. Last night I was just discussing with my son how the vacuum readings weren't correct because the engine wasn't...
True, and I may end up doing that, but the SCV was only $8, and vacuum advance $19; a small price to see if I can get it running right.
Yup. I'm replacing both the distributor vacuum advance and the SCV.
There is no carb tag but I'm sure it's correct, I've compared it to numerous photos/diagrams. There should be no vacuum at idle, and the spark...
I understand what you're saying, but I just looked at my door plate and it doesn't have any words similar to that; just Serial Number, assembly...
It was measured at the Venturi port - in the middle of the Venturi- well above the throttle plate. At idle manifold vacuum is 18". I ran a paper...
Oh, you mean the Data plate on the drivers door - my bad...
I don't think I understand what you mean by Warranty Plate… The NC DMV regulations say that in order to title a vehicle from the state which...
The FordSix.com page https://fordsix.com/ci/Loadomatic.html says it was used on "The Falcon Six" engine. It is a LOM distributor and the carb has...
What does the 2nd letter stand for? The fender apron has an "H" (as noted above), while my door dataplate has an "S".
As I understand it, the Load-A-Magic Distributor uses only the Venturi vacuum from the carburetor to advance the spark. It doesn't use centrifugal...
It's not a concours restoration - LOL - and I think it would take a lot of hand waving and fast talking to get it straightened out. The state...
Upon closer examination the "4" is actually an "H". So it reads 3H27U228447.
Separate names with a comma.
