Do your door rods rattle? Mine did. Here’s the solution. $3 at NPD. I just installed it. Has enough for both doors....
Meanwhile my seat upholstery vinyl arrived. I ordered it from this guy: https://www.falconcometinteriors.com/ It looks like it should. I’m going...
Ps. I also added shoulder harnesses. It wasn’t that difficult. With an all metal dash and the infamous ‘spear’ inside the control column I’m glad...
Looks good! It’s time for me to go see the interior shop and see what he can do. I like your classic look.
Good idea but I want to finish the interior first. That’s the next project. Hardest part will be rebuilding the seat. Some of the springs need to...
My headlights and interior dome light have flickered for as long as I can remember. I replaced the voltage regulator and alternator along the way...
Falcon Parts lays out the necessary bits the V8 steering conversion here:...
I’ve been camping in the Sierras; sorry for the delayed response… In my case I needed the 289, an appropriate transmission (I got a run out ‘67...
Ps. The most difficult part of the entire project was getting the old, corroded brake line fittings apart. One really should have proper flare nut...
The conversion has gone REALLY WELL! I am super happy with the results. I also sourced a 5 lug rear end from Wall To Wall Falcon parts in the Los...
I have a ‘65 Ranchero which originally had a 170 inline six, 3 on the tree, 4 lugs all around and the rear axle had a 3.50 ratio. I have now...
Thanks for the file. Very helpful.
Right. I’ve got the 1” sector shaft (the nut attaching the Pitman arm is 1-1/8”). It all seems okay, clearances are actually better than they were...
Separate names with a comma.
