It goes way back. From long before all the LSMFT tripe running around today. We used it on CB and shortwave conversations, and later, during the 70's on computer bulletin boards. Kind of fell out of favor because it is a lot more obvious written out than when said. If you say it, almost no one will put it together unless they are already aware of it.
Like the blond joke where she asked the parts counter person for a 710. Do we really need the barely disguised wirty dords?
That reminds me of the one where you say there are 3909 nuns in a convent and write 3909 on a piece of paper, then say there are three horny thieves out side and write 3ht then say that one of the nuns got pregnant and ask who did it.
Pope Sicola, of course. No worries, probably a better place hereabouts if we keep the bleepin' bleeps at a reduced state is all.
I agree that cursing has no place anywhere except where only grown men are around. I did find if amusing that you took exception to my using 'whiskey tango foxtrot' as a temporary screen name in order to log on after a site problem had deleted my password though. When written out or said in full, rather than abbreviated, the term has a greater depth of meaning and not generally considered coarse or offensive.
I guess Eeyore didn't think what you did was very funny, but it was. It's something Shemp would have done, only it would have been wallpaper paste rather than epoxy.
Now that's funny!! Well, to you and you alone. And I think the epoxy up the nose thing was hilarious. Slapstick at its best.
No, Shemp or Curly would have left it there to harden and I didn't think that it was that funny at the time.
As you don't post videos of exploits like this, let me introduce you to a different method; https://www.ebay.com/sch/i.html?_fr....Xpopsicle.TRS0&_nkw=popsicle+sticks&_sacat=0
It was mixed with a stick, I had a pinhole leak in my pool pump so I drilled an 1/8" hole, scuffed up the perimeter and was working it into the hole with my fingers. It worked great with no more leak, it was worth it as the new pump housing was over $300.00 to replace.
Is your point that were you working it in with a popsicle stick that the stick would have ended up in your nose? You really need to set up a webcam when you are working.