Yes it will bolt up to your block and heads
looks to DOT SAE approved
I would suggest taking it to a privet message click on the members name and this box should pop up then click on start a conversation.
That is the factory 4 bbl of the 64/65 era they changed it in 66 for better flow not really a good manifold for performance.
Paxton is a...
I am 6 hours away and used to go 2 or 3 times a year
I would have ripped out the cross member first time down the driveway
Not surprising the frames and under-body are pretty much the same from 72...
Looks like Pomona to me
let me see what I have
Intermittent switch will not work with out the governor but it will plug into the harness. If the governor was there you would see it. You have...
Rule of thumb Stock flat pulley yes reverse rotation Ribbed is std rotation. With aftermarket have to go by kit instructions
if the water pump is for a 89 mustang it is reverse rotation
5.0 mustang shorty headers did not clear the box in my 73 when I swapped it the 5.0
1960's FORD 144ci 170ci 200ci 6 CYLINDER OIL PUMP DRIVE SHAFT
NEW ... NOS FORD
PART # C0DZ-6A-618-A
MEASURES 2-7/8" X 1/4"
Are you sure I do nit thunk they do
What did the engine come out if
The only way I know of Pull it off and check the impeller
Randy are you sure it has the correct rotation water pump? I worked on a 5.0 Swap that was put in a 67 mustang doing about the same thing and it...
Fabrication time notch cross-member and box in notch with pipe call me if you want and we can discuss it
Actually I kinda like that long tube...
Just to clarify 72/3 was the last years they put a std in the torino platform 74 used a different pedal assembly the 72/3 pedals are not a bolt...
Separate names with a comma.