I have a set that I bought a few years ago and never took them out of the box ( still has the plastic strap around the box)
I plan on returning...
Here is a letter from HF about jack stands with faulty welds
Eric Smidt, Harbor Freight Tools Founder <email@example.com>
Welcome, good color combo.
Good luck. I also waited many years to get a fun car.
You from Joisy? I left there 7 years ago.
And engine oil never seems to vary, to me it creeps up
I'm with Andy on this
Convinced it's collusion!
Welcome to the site, lots of good information is offered along with some wise guys.
Post some pics when your ready its not that hard.
Ask here on...
And drink beer!
Try this Maxi fuse holder, may be able to find in a good parts store
It looks like the terminal was not crimped enough causing higher than normal...
I believe there is a difference between manual and power steering for tie rods and center link.
Did you try Wally World?
looked real quick $4.82 qt (Super Tech)
I just replaced the battery tray in "65. It had a original style F type tray with the hold down bracket on the end and the battery that the PO had...
we're here for you ask away.
I know you do not want to take it a part but the bearing numbers are universal , meaning the number of the bearing is marked on them and they...
A good front end inspection should be the first step into getting alignment.
A good shop will do so before performing the alignment, offer them...
Have you looked at the ball joints? History of car?
Any work done on the front end?
Without seeing it it's hard to offer a opinion there is a...
Yea that's easy for you to say
I think the pad has lost some of its flexibility ( just like a lot of us old people)
Instructions state several...
How about using a piece of wood shaped the same profile fitted on the back side and them using a small hammer with a soft head ( possibly leather...
Separate names with a comma.