your best bet is to measure yours and not rely on someone else measurements
there should be clips on the body around the rubber seal
2020 City of...
What all do I have to replace in my engine for this cam to work?
Asked by LIAM on November 04, 2018
Thank you for your question. COMP Cams...
yes it will work but your original is a heavy duty drum the extra meat and fins are for cooling.
and the best looking 77/9 Chero on the site
we need a pic of yours Dan
The higher voltage comes from less resistance in the primary feed wire. with the key in the run position you are only getting abort 8 or 9 volts...
7k with rotted qtr panels and a bad tranny..
The main purpose was to be able to run a Flatter distributor cam lobe causing less point bounce at higher RPM . With the 2 sets of points being...
yours is a 28 spine
We have not had a flight to the ISS since the end of the shuttle program in 2011 we have been relying on the Russians to do it!
Safely docked with station!!!!!!!!!
And no one notices sad!
my main email is still AOHELL and my cell is a flip phone
Separate names with a comma.