Well I guess it's time for a bit of an up date since August, life, the wife and COVID played hell in my world. I got the 95(4) block sent off to...
THAT IS AWESOME!!!!! Can you give a break down of what you did to the trans? I have an AOD that I am hemming and hawing about getting bench...
Bringing a propane tank into the house to use ...... sorry I gotta go drop a transmission on my chest, nice seeing you folks .o_O Cheers, Doc
I gotta admit my wife is the Admiral of the kitchen when it comes to mixing and seasoning but when it comes time to get to the cooking her butt is...
Andy I don't seek out his songs but they are sprinkled through my play lists and they always make me smile when I hear the opening chords....
BB you just gave me a major flash back to the year I got married in Hawaii. The was this little "German" restaurant in down town Waikiki and the...
I hope like he!! Andy is right because I'm going to poke headers in on a 77 that are "universal" and the header companies wont even talk to you...
With any luck when the wife goes to work on Sunday I will be cutting rings to fit my freshly machined block and possibly get my pistons poked into...
I am currently doing a similar build for my 77 Chero. I though about doing the 408 stroker thing but had to back off when I needed new heads...
I grew up in the 80's (high school) and VH was the beginning of the end of the last great rock bands. Everybody that played guitar wanted a...
I got you, didn't know that and will need the real number for cam specs Thank You! A quick search yielded ~4020. So I'm thinking that's fair. 3...
I think I like that option better than a deck job as it will also bump my CR up from about 9.2:1. Looks like I have some serious measuring to do....
The sticker on the door says GVWR 5940 GAWR: Front 2899 Rear: 3106 Cheers, Doc
@pmrphil I digging what you are laying down but doing the calc for squish and quench I will still need to have some knocked off the deck or the...
I'm in the throws of your adventure as we speak and so far the most frustrating thing is the piston choice which I'm sure will be eclipsed by the...
I'm getting the impression that I'm going to have to have the block or the heads decked to equal 0.020 to 0.030" which just opens up a whole world...
I'm a little confused about the "retro -fit" thing as the 95' block is a roller block. I did find the "perfect" piston on the Racetec side of...
@pmrphil this is the cam I was looking at https://www.lunatipower.com/bootlegger-retro-fit-hydraulic-roller-cam-ford-v8-351w-276-300.html I think...
I was looking at a set of Speed Pro pistons #H336CP 30's with a compression height of 1.772" which is 0.002 less than stock. It has a PHV of...
For info 1.94" intake valves, 1.60" exhaust. Flows 231 CFM @.50 intake and and 157 CFM @ exhaust. Roughly 67% efficiency. Looking at a Lunati...
Separate names with a comma.
