Has anyone got a link to a wiring diagram etc for a 74 underhood starter button. Mine is not functioning. Ta.....
More questions sorry..... Looking to upgrade the front end. Bottoming out over bumps etc...... Budget is tight, especially with being across the...
While I was mooching around the engine bay I could hear an intermittent noise coming from the area around the starter relay. Couldn't quite track...
About to replace the cable on my 74 due to it stretching, the replacement one does not have a spring over the bare cable unlike the original one....
Right...... I tried to start the Ranchero but the Starter clicked/jammed. Then nothing.I now have no power to fuse box. Interior lights are dim. I...
I'm toying with getting a lsd diff for my 73. Basically my question is, 28 or 31 or either? Ta.......
Been doing some reading on dim gauge bulbs, and come up with 'opaque blue diffusers' being a problem. Just wondering where these are? Do I need to...
The little tinkering jobs continue. Managed to get the wipers to attempt to park. Not quite tucking away yet tho. Is the linkage meant to have...
Hi.....just in the process of rebuilding my late 2100D carb.There is a baffle in the new kit, but no baffle was in the carb. Question is, do I...
Hi all........as above, I have a stalling problem at idle with blower and lights on......turn both off no problem. Alternator is giving 14 volts...
I'm thinking about fitting an insulated spacer under the stock carb [2100] on my 74. Getting some heat soak probs, but this will render the choke...
Thinking about replacing the u joints on my 74 GT. Looking on RockAutos website there seems all manner of different variations/yoke sizes...
Seems to be a plethora of reasonably priced HEI distributors available online, are these a worthwhile upgrade from stock on my 74 400M? The...
Hey.........just a quick one. Are the heater vacuum pipes connected to the vacuum pipes on the engine. Basically got an uneven idle and wondered...
Is there a standard distributor upgrade/replacement for a bone stock 1974 400 Cleveland? Just looking at keeping the thing reliable.Not sure how a...
[img] This oil pan came in a box of spares with the car, and looks like the one fitted to my 400 Cleveland Ranchero . Now someone in their wisdom...
Anyone know the thread size of the Smog Valve on the intake? 400 Cleveland.....Ta.
The HVAC saga continues.......Finally fitted both vacuum switches, and all good, doors opening closing etc. AC clutch working, so order new belt,...
While scratching around underneath trying to suss why the kickdown isnt working I noticed the bolt connecting the shift cable to the trans lever...
Looking for one for my UK 1974 GT........ [img]
Separate names with a comma.
