Glad you found one on Rockauto, $150 shipped is a good deal considering the trip involved.
I sent a PM, not sure it made it. I'd sell this one for $50 plus shipping. If you want it, I will box it up and send it for just the shipping...
I took a hydroboost unit from a Chevy Astro-van due to it's mounting style(easily removable mounting plate) and fabbed up my own mounting plate to...
I have an original brake booster I pulled off my '79 when I went hydroboost, probably never will re-install it(just kept it due to it being...
In your pic on #13 reply, you can see what looks like JB weld on the shaft/attachment ring of wiper switch @12 o'clock just behind the knob you...
I picked up a '95 351w out of an E350 for my late son's truck, came with Saginaw PS pump with serpentine pulley. The Saginaw pump can be very...
Although the Saginaw PS pump is a better unit, a hydroboost system can use a Ford built pump, my F250 SD diesel has hydroboost with a Ford pump....
IIRC, the whole spindle assembly will bolt up to '72-'79 Ranchero upper/lower control arms(a bit of a difference in the early UCA bushings), ball...
SOLD
10-4 Andy. Whenever you want them, just let me know. Thank you
Found a set of full-size/Lincoln brake caliper mounting brackets that allows larger diameter rotors to be installed while reusing your '73-'79...
Nice work on the struts, but more impressed with having all that weight required to re-seat the sprayer/hose, better not let it go when at full...
IIRC, That is the ambient air temp sensor for the A/C compressor. It is said once air temps fall below 50'(may be a bit lower) F this sensor won't...
It seems to be getting worse to be able to purchase "good" and "reliable" parts, especially electrical parts, for our rides. IMO, If you have any...
Have a good look at the DS II and the way the cap/adapter attaches, I believe what I was trying to convey(I do have a hard time explaining things)...
Hey Andy, my apologies, Dan informed me that he uses a non-DURASPARK cap. So you were correct in your assumption that what I was thinking won't work!
Then I need to send an apology to Andy!
You should look at the distributor cap and adapter again, if you remove the tang that locates the cap to the adapter, the cap will move without...
Just to get the timing good, how about removing the tang that locates the distributor cap to the distributor cap adapter? If done the clips won't...
Hey Dan, maybe some heat with a propane torch to get the block warm/hot around the distributor then hit the distributor body with some carb or...
Separate names with a comma.
