Out of stock at Summit, too (they don't tell you that until you're about to check out).
They are out of stock at Falcon Parts....I had already checked there, too.
All: Has anyone found one of these *recently*??? I have searched at all of the usual suspects (Ecklers/Mac's, Rock Auto, Kanters, etc.) and NO...
The pop is intermittent, but typically upon acceleration (e.g. up a hill).
Okay, time for an update. It seems to me that I have the rich-running problem fixed, but timing still seems kinda wonky to me. I don't...
Well, this one has been M/T from the get-go, and had no dashpot on the carb when I bought it, so that might be the connection (I have *no*...
All, I have a 1961 Ranchero with a 144cid and column shift M/T. Just finished rebuilding my carb, but I had to cobble two together. Trouble is,...
Definitely running rich… all of the plugs were like this…powdery black layer that wiped off fairly easily. [ATTACH]
I bought a rebuild kit. Unfortunately, I cleaned all of the plugs (it had mostly been sitting for the last two years, and had not run at all for...
Fuel filter is new. Definitely not plugged or restricted.
hi Handy Andy. The carb is the 1bbl Holley 1904.
Faulty vacuum connection and vacuum advance seem to have been the main culprits. I got it adjusted to specs, but now I seem to have a flooding...
Well, Leigh ('61 Ranchero, 144cid, manual column shift) is finally back on the road. Been driving her here & there to work out the kinks (leaking...
Thanks beerbelly....that does indeed look like the same part that CJPonyParts is marketing.
I'm aware of the CJPonyParts 'kit'. I was actually just hoping for an off-the-shelf part number, since this kind of master cylinder is like $30...
Before: [ATTACH] [ATTACH] [ATTACH] After: [ATTACH] [ATTACH] [ATTACH] [ATTACH] 6 years....two job changes...learned a lot!! Leigh is now...
Okay, I *know* I've seen the correct part number here before, but I cannot track it down now. I know I had it written down on a scrap of paper,...
Handy_Andy, thank you SO much for looking!! Brad
I would need it shipped to Virginia (and of course I’d pay the part + shipping costs). The Craigslist guy was in Sacramento. So, yes, if you see...
Contacted him. He does not ship parts. Anyone out there near enough to Sacramento to pick it up & ship it to me? Brad
Separate names with a comma.
