1970-1971 Torino/Ranchero GT SPEEDOMETER CLUSTER CIRCUITS

Discussion in 'General Ranchero Help' started by andrewok1, Apr 5, 2019.

  1. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    I am trying to see how many members would be interested in these circuits for their cars
    we need at least 15,to make a run of them ,
    ANDY
    ANDREWOK94@GMAIL.COM
     
  2. Basstrix

    Basstrix In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,226
    Location:
    Phoenix, AZ
    I would probably be interested. Do you have a price estimate?
     
  3. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    the others have run at no more than 165.00 ,shipped these are small in the materail used for them
    I think they will be $140 shipped

    the more HE MAKES lowers the price all so check with the face book guys that have 1970-71 ,
    \ANDY
     
  4. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    Neill ,
    has started with tracing the 1970 -71 circuits tonite, he should be done with them by the middle of next month. '
    still looking for more interested members for these circuits making 10,
     
  5. grebaba

    grebaba In Third Gear

    Messages:
    221
    The reason I converted to digital was because I couldn't find these. Owners of 70-71's should pull your speedo and check your circuit board. I think a lot of people will be surprised at how bad the condition will be after all most 50 years of use.
    They may work fine now but will go bad in the future.
    Greg
     
  6. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    mechanical layout of the 1970_71 circuit-this is done to ensure proper fit to the housing
    [​IMG]
     
  7. 6delta

    6delta In Third Gear

    Messages:
    246
    Location:
    Citrus Heights, CA
    Is there a difference in the GT vs Squire or 500 circuit?
     
  8. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    they are all the same 1970_71/ Andy
     
  9. Jeff B

    Jeff B In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,238
    Location:
    SoCal
    This is a cool thing you guys are doing. Mine works (for now) but there has to be enough peeps out there to get a run going. Keep up the good work.
     
    NeillNZ and andrewok1 like this.
  10. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    TR7071FCv2.jpg progress NEILLS making
     
    Jeff B and Basstrix like this.
  11. kidrock429

    kidrock429 In First Gear BRONZE MEMBER

    Messages:
    20
    good job i will need a few of these .
     
    NeillNZ likes this.
  12. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,480
    Location:
    ocala ,florida
    HEY KID ROCK \
    How many circuit cause we only have 5 being made
     

Share This Page