1972 - 1979 Body Insulator Bushings

Discussion in 'Ranchero Tech Reference & Articles' started by 72GTVA, Jan 20, 2008.

Thread Status:
Not open for further replies.
  1. 72GTVA

    72GTVA Administrator Staff Member

    Messages:
    9,863
    Location:
    Chesapeake, VA
    Attached are some diagrams for Body Mounts: If we find a source for bushings correctly sized we'll post that information too:

    [​IMG]

    [​IMG]

    Note: Sometime between '73 and '75 the #4 body mount was eliminated and, the #5 mount on the 77-79 models is not a bolt in unit like the 72-76 models. The frame does not have an access for the hardware. They use a press in type rubber mount that sits on the frame and the body just lays on that (no hardware).


    [​IMG]


    [​IMG]

    If you have any updated measurements or information send me a note and we'll include it with this Reference Note.
     
    Last edited by a moderator: Jun 15, 2008
    72GTVA, Jan 20, 2008
    #1
  2. 72GTVA

    72GTVA Administrator Staff Member

    Messages:
    9,863
    Location:
    Chesapeake, VA
    72GTVA, Sep 24, 2010
    #2
Thread Status:
Not open for further replies.

Share This Page