1977RancheroGt

Discussion in 'Ranchero Parts Wanted' started by jim darby, Dec 3, 2017.

  1. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    I'm in need of a left front spindle and rotor, a right front turn signal molding for 1977 Ranchero GT , please can anyone help
     
    andrewok1 likes this.
  2. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER

    Messages:
    2,021
    Location:
    ocala ,florida
    try looking at your local u pull it yards & LKQ yards - Google them, other members may have ideas as well /andy
     
    Last edited: Dec 3, 2017
  3. aquartlow

    aquartlow In Maximum Overdrive

    Messages:
    1,079
    Location:
    Summerfield Florida
    If Andrewok1's recommendations don't give you the needed results(any 70's vehicles are getting harder to find in salvage yards), Car-part.com would also be an option.
     
  4. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    tried all wrecking yards within 200 miles, and really can't afford aftermarket prices will keep looking
     
  5. RANCHEROROB

    RANCHEROROB In Maximum Overdrive GOLD MEMBER

    Messages:
    3,131
    Location:
    Pueblo de Los Angeles, Aztlan
    a right front turn signal molding ?

    You may be better off buying a new rotor,
     
  6. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    yes true on the rotor, do you have the turn signal molding , if so how much
     
  7. RANCHEROROB

    RANCHEROROB In Maximum Overdrive GOLD MEMBER

    Messages:
    3,131
    Location:
    Pueblo de Los Angeles, Aztlan
    I'm not sure what you mean by Turn Signal Molding ?
     
  8. 1978GT

    1978GT In Third Gear GOLD MEMBER

    Messages:
    223
    LH spindle part no:
    D4AZ-3106-A
    Interchange:
    74-76 Torino, Montego, Meteor, Mark IV
    74-78 Ford & Merc full size
    74-79 Ranchero, Thunderbird, Cougar, Mark V

    Get a new rotor anywhere, but replace RH at same time.

    Ask Santa to bring you a new park/turn lamp.
     
    Last edited: Dec 3, 2017
  9. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    the turn signal & park lamp , screws into fender is clear with amber front
     
  10. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    I have this same list as I posted earlier I've checked every wrecking yard with in 200 miles of my home there are none was refered to this forum so I'm trying to find at least the spindle just ordered new rotors still need the spindle
     
  11. LSChero

    LSChero In Maximum Overdrive PLATINUM MEMBER

    Messages:
    1,724
    Location:
    Area 6 NV
    Here is pic of mirror Jim.There is a yard in pacific north west that will pull and ship parts.I have got parts from him in past.Ill try to find addy.
    SAM_3885.JPG SAM_3886.JPG
     
  12. LSChero

    LSChero In Maximum Overdrive PLATINUM MEMBER

    Messages:
    1,724
    Location:
    Area 6 NV
  13. jim darby

    jim darby In First Gear

    Messages:
    6
    Location:
    montana usa
    thank you for the link do you have the mirrors or are they at this link also
     
  14. LSChero

    LSChero In Maximum Overdrive PLATINUM MEMBER

    Messages:
    1,724
    Location:
    Area 6 NV
    Yep,its a link to mirror described in PM I sent you.
     

Share This Page