1978 Ranchero wont start

Discussion in 'General Automotive Questions' started by kal, Sep 9, 2018.

  1. kal

    kal In Third Gear

    Messages:
    101
    Location:
    Charleston WV
    ok found the problem not getting fire & found hole in filler neck that is attached to exhaust manifold.
     
  2. kal

    kal In Third Gear

    Messages:
    101
    Location:
    Charleston WV
  3. kal

    kal In Third Gear

    Messages:
    101
    Location:
    Charleston WV
  4. kal

    kal In Third Gear

    Messages:
    101
    Location:
    Charleston WV
  5. 65restomod

    65restomod In Overdrive BRONZE MEMBER

    Messages:
    848
    Location:
    Danville,VT left NJ forever
    Just looking at some old posts and was wondering if the problem was solved.
    The posted pictures seem to be the hot air stovepipe which gets hot air to the air cleaner for warm up.Correct me if I am wrong
    Been a very long time working on some thing that old , probably 40 years
     
  6. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    12,143
    Location:
    Seguin, TX
    Yes, that was the hot air stove for the air cleaner snorkel.
     
  7. FordR500GT

    FordR500GT In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,335
    Location:
    El Paso, TX
    I'm willing to bet that either the ignition switch or Duraspark Module is bad. i've dealt with it plenty of times
     

Share This Page