72 - 79 Ranchero rear bumper

Discussion in 'Ranchero Parts Wanted' started by Jeff Rylant, Aug 8, 2018.

  1. Jeff Rylant

    Jeff Rylant In First Gear

    Messages:
    5
    Looking for a 72 - 79 Ranchero rear bumper. Preferably without the steps / bumpers.

    Located in Georgia.
     
  2. 1979 RANCHERO GT

    1979 RANCHERO GT In Overdrive

    Messages:
    830
    The bumper guards bolt through the same holes that hold the bumper on, no extra holes.
     
  3. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    2,598
    Location:
    ocala ,florida
    http://www.bumperboyz.com/ 520.00 with out core 420.00 with core ,
     
  4. Jeff Rylant

    Jeff Rylant In First Gear

    Messages:
    5
    Good to know. Didn't realize that. Thanks.

    Thanks. Considering them and there's another one in Tennessee. Exploring my options. Hoping to find a decent driver, and a better price.
     
  5. 1978GT

    1978GT In Fourth Gear GOLD MEMBER

    Messages:
    273
    Absolutely wrong, at least for 77-79. Each rear bumper guard requires three holes - two on the rear surface and one on the top surface. None of those holes are used for bumper mounting.

    The front bumper guards do not require additional holes, but the rear guards do.
     
    Jeff Rylant likes this.
  6. 1979 RANCHERO GT

    1979 RANCHERO GT In Overdrive

    Messages:
    830
    mixed up the front for the back. Front don't use extra holes, back do.
     
  7. Dan the ranchero man

    Dan the ranchero man MODERATOR Staff Member

    Messages:
    3,764
    Location:
    Mchenry , IL
    don't forget the 72-73 Torino and Montego wagons use the same bumper.
     
    Jeff Rylant and Oculto like this.

Share This Page