72 ranchero gt front bumper

Discussion in 'Ranchero Tech Help' started by lyndog, Feb 5, 2012.

  1. lyndog

    lyndog In First Gear

    Messages:
    15
    Location:
    paso robles,california
    Ok I give for the day of the Super Bowl ....But in between chips and beers my mind will be still trying to figure out how to get the front bumper side bolts off my 72 gt ranchero without taking off the front end ....Anybody know how to get it off..all but two bolts are accessible....thanks :confused:
     
  2. ribald1

    ribald1 Banned PLATINUM MEMBER

    Messages:
    19,727
    Location:
    California
    If you drop the lower valance you can remove the bumper and brackets complete by removing 8 bolts on the end of the frame horns.
     
  3. 5.0 Chero

    5.0 Chero Bahumbug Staff Member

    Messages:
    14,149
    Location:
    Prunetucky California
    I agree this is the easiest way if not the only way
     
  4. airford1

    airford1 In Maximum Overdrive

    Messages:
    1,396
    SpillinWe did it this way,Still took the valance off.
    [​IMG]
     
  5. lyndog

    lyndog In First Gear

    Messages:
    15
    Location:
    paso robles,california
    help was to good...

    Thanks you all are great.....I have all new show polished trim...and I will have all the other stuff up for grabs..thanks...:)
     
  6. lyndog

    lyndog In First Gear

    Messages:
    15
    Location:
    paso robles,california
    Think I'll stick with the other way...That looks like way to much work...LMAO
     
    Last edited by a moderator: Feb 7, 2012
  7. lyndog

    lyndog In First Gear

    Messages:
    15
    Location:
    paso robles,california
    thanks...

    Thanks ....thats what I was hoping for....
     

Share This Page