Correct Carb Spacer for I6-200?

Discussion in 'General Ranchero Help' started by Steve Naranjo, May 16, 2019.

  1. Steve Naranjo

    Steve Naranjo In First Gear

    We have a 62 Ranchero with an I6-200, we thought out of a 68 Mustang - the previous owner did not provide a lot of detail. We found an original carburetor and the spacer plate but have now discovered that the spacer plate matches the carb but not the flange on the manifold. The manifold is part # C9DE-6090-M. Does anyone happen to know the part number for the correct spacer for this manifold? The photos show that the distance between the pins on the carb are 2.75 inches. The distance between the holes on the manifold is just over 3.25 inches. Thanks for any help.

    IMG_3432.jpg IMG_3434.jpg
  2. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Portland OR

Share This Page