DOREE PART 2- 1972 SQUIRE

Discussion in 'The Stable' started by andrewok1, Jul 19, 2018.

  1. FrenchFan

    FrenchFan In Overdrive SILVER MEMBER

    Messages:
    728
    Location:
    Rennes / FRANCE
    cleaning these beds is the school of patience.
     
    andrewok1 likes this.
  2. Dave Enty

    Dave Enty In Second Gear

    Messages:
    37
    Location:
    Ramsbottom
    Did mine a few weeks ago but not to bare metal as you are doing. It was bad enough on mine just rubbing it down to prepare for fresh paint, I don't envy you having to get into all those bed mouldings and corners.

    Incredible job you're doing though, I still look at this thread for inspiration at times. :)
     
    andrewok1 and pmrphil like this.
  3. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    Lucky it had a cap on it
     
  4. Clark

    Clark In Maximum Overdrive

    Messages:
    3,068
    Location:
    Brighton, Colorado
    Time for Line-X or Rhino Liner?
     
    Buds 67 and andrewok1 like this.
  5. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    You got to make sure the Mounting holes at top Corner bed trim are Sealed......
    Also the storage area had a seam in the bed ..2 foot from back wall of cab...
     
  6. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    Got bed down to metal... need to clean window lip...black sealer on it
    Moving forward little more and it's sandable...then sealer
    1000001438.jpg 1000001433.jpg 1000001438.jpg 1000001433.jpg
     
  7. RancheroRandy

    RancheroRandy In Maximum Overdrive

    Messages:
    1,288
    Location:
    NC
    THAT is a lot of work!
     
    andrewok1 likes this.
  8. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    More done 1000001506.jpg 1000001507.jpg
     
    RickMc, RancheroRandy and Buds 67 like this.
  9. RickMc

    RickMc In Third Gear

    Messages:
    142
    Man, that looks like a lot of work!
     
  10. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    First coat of KBS RUST SEALER on the bare metal in bed...I have to scuff it down with 400 grit and top coat...

    Tropical storm coming needed it sealed up ...needs a Second coat then .. Rapture
    Bed liner.


    1000001648.jpg 1000001649.jpg
    Making progress
     
    Last edited: Aug 4, 2024
    LSChero, FrenchFan, Lincolnut and 2 others like this.
  11. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    It Dry's in 2-4 hours and thinners won't remove it..
    KBS RUST SEALER
    GOOD stuff...
    Gloss black is 48.00 a quart...
     
  12. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    4,864
    Location:
    Portland OR
    How's Debby treating you down there Andy?
     
    Buds 67 likes this.
  13. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    She is Dripping wet 8 inches of rain 2 days finally stopped this afternoon..
    Thanks
     
  14. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    We got a New Tropical Cyclone . That's what they are calling it will be on us
    Thursday...
    ..
     
  15. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    4,864
    Location:
    Portland OR
    Is Ocala fairly high ground Andy? Are you planning to sandbag or board up windows? Or just a pool party??
    I was living in Houston in 1983 when hurricane Alicia came through, a category 3. I could see downtown Houston from my apartment, and it looked like a war zone, with transformers blowing up everywhere. I listened to what folks were telling me, and taped up my windows, filled up the tub so I had water to flush, and bought up a bunch of stuff I could eat or cook on my Coleman stove. The A/C was out for days at my apartment, but was still OK at work, so I slept on the couch there for a few days. The other days were spent in the apartment pool and drinking beer to stay cool.
    I hope Helene gives you a break.
     
    andrewok1 likes this.
  16. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    We are located 65 miles inland from each Coast....we have had power outage for 4 Days during previous storms I have a
    20 KW propane Generator...it's a commercial unit powered by A Pinto 4 cylinder...300 lbs tank of propane... Good For 14 days constant run ..
    I have in the past put up plywood over windows .... thanks for your concern to ask ... I believe we will ride it out and just heavy winds 60 mile per hour...no trees around house 200 feet... over clear area.
     
    Buds 67 likes this.
  17. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida

    Hurricane Milton is on the way looking like Cat 4 ..
    Coming right across us
    praying for it to lessen its strength.. before land fall... fingers ...o_O :mad:
     
  18. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    4,864
    Location:
    Portland OR
    I think your generator will be your saving grace Andy; you can have electricity for lights and refrigeration, maybe even A/C...
    Here's hoping all goes well.
     
  19. pmrphil

    pmrphil In Maximum Overdrive GOLD MEMBER

    Messages:
    2,255
    Location:
    central CT
    Andy, are on city water or a well?
    Batten down the hatches and hang tough.
     
    andrewok1 likes this.
  20. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    4,376
    Location:
    ocala ,florida
    IMG_20241008_171101 (1).jpg
    Thanks... well I have 300 gallon
    reverse osmosis tank...TDS LEVEL STAYS 23 ..pump in garage.

    AOK... -RICHARD. THANKS IMG_20241008_230504.jpg IMG_20241008_230512.jpg
     
    Last edited: Oct 8, 2024
    Buds 67 and pmrphil like this.

Share This Page