DOREE PART 2- 1972 SQUIRE

Discussion in 'The Stable' started by andrewok1, Jul 19, 2018.

  1. 1979 RANCHERO GT

    1979 RANCHERO GT In Overdrive

    Messages:
    881
    Check your local body shops. A cheap source for some sheet metal, bent hoods we throw out. They're free for anyone who takes the scrap panels from the wrecks we fix. Only problem is acetylene torch welds or brazing can't be done with the newer car sheet metal.
     
  2. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    thanks 79 Ranchero ,
     
  3. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    IMG_0211.JPG IMG_0208.JPG IMG_0218.JPG IMG_0212.JPG IMG_0220.JPG IMG_0222.JPG IMG_0224.JPG IMG_0217.JPG THE RANCHERO ROOST needed to be cleaned out, moved squire chassie over to see its body ,
     
    LSChero likes this.
  4. Hillbilly

    Hillbilly In Maximum Overdrive

    Messages:
    5,268
    Location:
    Winchester, TN.
    I can't wait to see this Cinderella story in the final pages.
     
    LSChero and andrewok1 like this.
  5. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    If you have the time we have the Beer MILLER TIME , sorry that's a beer commercial
    lots to do on the CHAMPAGNE of beer budget !!!!
     
  6. Hellcat

    Hellcat In First Gear

    Messages:
    12
    Found your post ! So is the trim for a 73
     
  7. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    1972 I DO NOT HAVE ANY FOR SALE .I was stating a fact that it is expensive to get trim for the Sqiure in fair condition
     
  8. TestDummy

    TestDummy In Maximum Overdrive SILVER MEMBER

    Messages:
    21,977
    Location:
    C'Ville
    Is yours in bad condition? How much?
     
  9. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    \
    mine trim is very nice
    i am going to sell it when i am get done remaking it out of real ash wood = 1700.00 is the cost To you TD 2500.oo for anyone else
     
  10. andrewok1

    andrewok1 In Maximum Overdrive SILVER MEMBER GOLD MEMBER

    Messages:
    3,155
    Location:
    ocala ,florida
    IMG_8886.JPG IMG_8885.JPG IMG_8893.JPG IMG_8891.JPG Found a nice FORD A/M - F/M, for the Squire with no hacked wires
    works well i have Nos knobs for it
     
    Last edited: Feb 18, 2019
    HuevosRanchero likes this.
  11. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    8,239
    Location:
    Everett, WA
    Since I used Mercury knobs in Babe's cab, I have a set of Mercury radio knobs stashed away, if I ever find a usable radio.
     

Share This Page