Found place for kick panels

Discussion in 'Ranchero Parts for Sale LINKS' started by 65restomod, Oct 20, 2019.

  1. 65restomod

    65restomod In Fourth Gear BRONZE MEMBER

    Messages:
    473
    Location:
    Danville,VT left NJ forever
    https://rhinofabrication.com
    I found this site while looking for kick panels with speaker cutouts.They seem to be OK .
    Less expensive that Mac's or Falcon sites
    Of course they only come in black but say they are paint ready.
    They have a lot of early '60's to late '70's plastic panel replacement for at least Ford and GM
    Also have some fan shrouds and plastic B pillar covers for the rancheros
     
  2. RancheroRandy

    RancheroRandy In Overdrive

    Messages:
    629
    Location:
    NC
    I've used them in the past and have their products currently on my vehicle. They manufacture the products and sub out to other vendors...
     
  3. russosborne

    russosborne In Fourth Gear

    Messages:
    359
    Location:
    Glendale Arizona
    Bummer.
    Nothing for a 72/newer.
    Russ
     
  4. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    2,253
    Location:
    Portland OR
    That's what I have; nice fit and heavy duty construction.

    IMG_7152.JPG
     
  5. 65restomod

    65restomod In Fourth Gear BRONZE MEMBER

    Messages:
    473
    Location:
    Danville,VT left NJ forever
    BB, I saw your picture in a previous post when I asked about the speaker ready kick panels and I did not realize they were Rhino Fabricating.
    If you did mention the company I apologize.
    Did you install any Dynamat behind the panels and if so do you think it made a difference?
     
  6. colnago

    colnago In Maximum Overdrive

    Messages:
    1,101
    How far do the speakers extend into the cab? Can you still get to the high/low headlight switch with your left foot?

    Joseph
     
  7. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    2,253
    Location:
    Portland OR
    They extend about 3" to the face of the speaker. Here's a shot of the headlight switch in it's original location; I could reach it OK, but decided to move it 1-1/2" closer to the center of the car.

    IMG_7153.JPG
     
  8. 65restomod

    65restomod In Fourth Gear BRONZE MEMBER

    Messages:
    473
    Location:
    Danville,VT left NJ forever
     
  9. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    2,253
    Location:
    Portland OR
    Cut another hole and try and use the old opening?

    Yes.
     

Share This Page