Help needed replacing hood seal, 65 Ranchero

Discussion in 'Ranchero Tech Help' started by neil brown, Oct 21, 2019.

  1. neil brown

    neil brown In Second Gear

    Messages:
    93
    Location:
    UK
    So, Ive brought a new hood seal to replace this completely sun baked one, but...
    IMG_2801S.JPG
    The clips are a nightmare to remove. I used a 'trim removal' tool, but chipped the paint, but managed to pry out the first one, then the second one snapped, depositing half of it inside the cowl. Time to stop..


    IMG_2803S.JPG
    This is the new trim, the back of it seems to open up on the back of the panel when its fitted, but I cant see a way of collapsing it to remove it, anyone done this before?
    IMG_2805S.JPG
     

Share This Page