Last of my Chero parts

Discussion in 'Ranchero Parts For Sale' started by CJ Guy, Dec 11, 2017.

  1. CJ Guy

    CJ Guy In Maximum Overdrive

    Messages:
    2,841
    Location:
    Space, The final Frontier
    I have a few misc parts, make me an offer,
    1. Manual conversion parts, hump, steering column (D20A-38302-CB-SXBTC, D20B-11572-A1B, D20A-3530 AWB &BWB), crossover bar w/bracket/linkage, speedo cable (D20F-17260-DA-6JB), pedal assembly
    2. NOS rear tailgate moulding, 2X NOS drivers side end cap moulding
    3. NOS pair scuff plates
    4. NOS pair black speaker grilles
     

    Attached Files:

  2. TestDummy

    TestDummy In Maximum Overdrive SILVER MEMBER

    Messages:
    23,266
    Location:
    C'Ville
    That's a hell of a nice package there, buddy!! The parts, you freak!!!
     
  3. CJ Guy

    CJ Guy In Maximum Overdrive

    Messages:
    2,841
    Location:
    Space, The final Frontier
    I'm still finding stuff, getting ready to move to ArKansaS, you should buy a Fishmouth and convert it to a 4-sp...
     
  4. 5.0 Chero

    5.0 Chero Bahumbug Staff Member

    Messages:
    14,080
    Location:
    Prunetucky California
    Roy Old pics? did not see a mention of the toploader in the pictures
     
  5. CJ Guy

    CJ Guy In Maximum Overdrive

    Messages:
    2,841
    Location:
    Space, The final Frontier
    Not old pics, it was just sitting there, it's going behind that 351C I built.
     
  6. dbailey

    dbailey In Second Gear

    Messages:
    58
    I am interested in the "Tailgate Moldings". Send a E-Mail to me (dan.bailey1@aol.com) with the price. I will also need them shipped to Oregon.
    Thanks,
    Dan
     
  7. CJ Guy

    CJ Guy In Maximum Overdrive

    Messages:
    2,841
    Location:
    Space, The final Frontier
    I am now selling the toploader RUG B G 1, completely rebuilt. I don't have any use for it now, looking for a good home and to fund a rebuild of the stang toploader.
    https://i.imgur.com/bBUbXcK.jpg
     
  8. TestDummy

    TestDummy In Maximum Overdrive SILVER MEMBER

    Messages:
    23,266
    Location:
    C'Ville
    I've been wanting to acquire parts to convert mine to manual. The pedals are in it, as is the tunnel hump.
     
  9. CJ Guy

    CJ Guy In Maximum Overdrive

    Messages:
    2,841
    Location:
    Space, The final Frontier
    Hey dude, sup? All that stuff went to a member except for the trim molding, besides it's for a 72 or later. Putting that cleveland in my stang (til I get the 428 done) and the tranny won't work so converting the stang toploader to small in (sbf). Wanna buy it, make you a deal...
     
    ForistellFord likes this.
  10. RickMc

    RickMc In Second Gear

    Messages:
    86
    I realize this conversation is for another member, I am searching for parts for my 78. If the moldings are not spoken for I would be interested. Thanks for the time.
     
  11. Lee bear

    Lee bear In Second Gear

    Messages:
    76
    Location:
    Kingman Az
    Rickmc call me on your 78 parts you need
     
  12. ForistellFord

    ForistellFord In Maximum Overdrive GOLD MEMBER

    Messages:
    14,885
    Location:
    Beautiful Foristell Missouri
    For all the trouble he's caused you here, I hope you charge him double what it's worth.
     
  13. RickMc

    RickMc In Second Gear

    Messages:
    86
    Sorry for the late reply, mainly looking for some exterior moldings. I have a two tone so moldings are upper and lower, most are in good shape but not all. Moldings at the top of bed are pretty banged up, don't know if there is anything better out there but always worth a look. Would like another set of front turn signals, but prices seem to be a little high right now for the ones I've seen, would buy if the price is a little more realistic. Thanks
     
  14. SouthCarolinaRanchero

    SouthCarolinaRanchero In Third Gear

    Messages:
    155
    Location:
    South Carolina Near Spartanburg
    Is the rear tail gate molding still available??
     
  15. RickMc

    RickMc In Second Gear

    Messages:
    86
    I have purchased items from this seller before. His moldings are nice, dents removed and highly polished, they are no longer anodized though. He does come across complete set for the bed, which is what I did, though I had to contact him and ask if he had the whole set. He also has the 2 rear corners as well, here is the link: https://www.ebay.com/itm/1972-73-74...948514?hash=item2d2185d9e2:g:GwYAAOSwDgtf4pbc
     

Share This Page