Making progress on my Chero...

Discussion in 'Ranchero Tech Help' started by Dark Side Tom, Jan 20, 2019.

  1. Dark Side Tom

    Dark Side Tom In Third Gear BRONZE MEMBER

    Got the fork and clip nonsense sorted out. New clutch, bell, and new TO bearing/fork/boot installed. A tad challenging from under the car with no lift!

    Up on four jack stands...

    Pulled the side cover from the T10, and looks great! Will put fresh oil in it.

    Will reinstall as time and weather permits!

    LSChero likes this.
  2. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Everett, WA
    That's good to hear. Yeah, when Babe was shopped last year, I had the unenviable job of installing the trans from underneath (C4). So I used two ratchet straps and the floor jack to accomplish that, with Babe on four jackstands. I had more trouble moving my body and arms underneath than I did moving the jack and trans.

Share This Page