I think a section devoted to modifications the members have made would be good..would save alot of time, by not asking the same old questions.. examples. what is the largest wheel\tire combo on a 1968 ranchero... will the axle from a mark vii bolt into a 1977 Ranchero... etc: i just did a rear spring install, using springs from a 1998 Ford Crown vic police car... needed to cut about 1.25 inches off both ends of the spring..., also took the front bumper support out of the bumber, raised the front end about an inch or more... so I now need to cut the front coils.. each person could use his name and have sorta a space.. the can tell about what he did, what parts were used, were to get them... and keep a running log best
Good idea. I have to learn the New Software for the site to edit it. As you might have seen it has not changed in a while. I have not had the time to dedicate learning this but there should be some changes in the near future.
