Red Rocket

Discussion in 'The Stable' started by DJ Clinton, Oct 19, 2017.

Tags:
  1. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    81 Door cards.jpg Finally, after several false starts, and finding new backing, I was able to get the door cards mounted. I ended up using a 4x8 sheet of 1/16 plastic I found at Home Depot for backing. Not perfect but I am happy with them. Note, no window handles. I opted for electric windows and power door locks.
     
  2. RancheroRandy

    RancheroRandy In Maximum Overdrive

    Messages:
    1,288
    Location:
    NC
    It's your vehicle so whatever is cool with you IS cool....!
     
    Kiwirancher likes this.
  3. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    Nice day. Red Rocket needed a wash-too much dust in the garage. Used my new Ryobi hand held pressure washer with a foaming attachment. Worked great.
    Also replaced the vacuum advance on the distributor. No vacuum on the old one. Really improved the idle! 20240516_135941.jpg
     
    Buds 67 likes this.
  4. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    This week, it was warm/dry enough to finally install the door weatherstrip. I did something different. I used 3/8" vhb tape, after prepping both surfaces with the recommended stuff. No mess. Went on well and seems to be sticking well too. Time will tell.
     
  5. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    Haven't done much lately. Moved from a condo to a house(about 1/4 mile away), with a 2 car garage!. Much more room to work, once I get the house put together. 58 new garage.jpg
     
    Kiwirancher likes this.
  6. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    I moved last July. I drove the Red Rocket to the new place & put her in the garage. Finally had time to pull her out(on her own power) & give her a bath. I hope I'm far enough on the house that I can spend time with her. 20250705_141743.jpg
     
    pmrphil and beerbelly like this.
  7. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    4,845
    Location:
    Portland OR
    Lookin' good! Curb feelers- haven't seen those in a while.
     
  8. Ran Man

    Ran Man In Fourth Gear

    Messages:
    382
    Looks very nice
     
  9. DJ Clinton

    DJ Clinton In Fourth Gear GOLD MEMBER

    Messages:
    287
    Location:
    Mesquite, NV
    Fall cleaning. I found the emergency lights at a 20251021_124357.jpg n auction. From the early 70's. Looks cool for a car show & easy to remove. Yes, lights & siren work. My daughter is making a cover for the lights.
     
    Buds 67 and Clark like this.
  10. 5.0 Chero

    5.0 Chero Bahumbug Staff Member

    Messages:
    14,297
    Location:
    Prunetucky California
    Need to have a couple magnetic decals made up upload_2025-11-3_15-23-15.png
     
    Buds 67 likes this.

Share This Page