Until they mentioned Canada

Discussion in 'Lounge' started by plumcolr, Dec 26, 2019.

  1. plumcolr

    plumcolr In Maximum Overdrive SILVER MEMBER

    Messages:
    1,320
    Location:
    Freehold NJ
  2. franmosso

    franmosso In Fourth Gear

    Messages:
    438
    Location:
    North East
  3. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    9,534
    Location:
    Everett, WA
    A rollback truck with a stick that turns 13s? Sign me up!
    And that Windsor has to be at the absolute outside bore and stroke it can take. A race engine builder once told me his opinion that the 260/289/302 was the most efficient engine Detroit made, and therefore the best racing engine, simply because intake and exhaust runners are not siamesed.
     
  4. ForistellFord

    ForistellFord In Maximum Overdrive GOLD MEMBER

    Messages:
    14,755
    Location:
    Beautiful Foristell Missouri
    You can probably see the gas igniting through the cylinder wall.
     
    plumcolr likes this.
  5. pmrphil

    pmrphil In Overdrive GOLD MEMBER

    Messages:
    983
    Notice how they say "based" on a 302 V-8? Look at the dyno pic - that's a Dart aftermarket block, and by the position of the core plugs it's either a 8.700 deck 302 or a 9.2/9.5 Windsor deck block. Freeze plugs look too far from the deck to be a 8.200 deck height block. So 394 isn't all that far out.
     
  6. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    9,534
    Location:
    Everett, WA
    Wasn't the 8.700 block the Boss 302 block?
     
  7. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    9,534
    Location:
    Everett, WA
    Although, a 351 block would be more likely.
     

Share This Page