What color bulb for front turn signal

Discussion in 'General Ranchero Help' started by Snaggerbob, May 4, 2022.

  1. Snaggerbob

    Snaggerbob In Second Gear

    Messages:
    35
    Location:
    Nokomis, Illinois
    Clear or amber?
     

    Attached Files:

  2. Jeff B

    Jeff B In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,570
    Location:
    SoCal
    Amber. While you are in there, clean the socket and apply a dab of dielectric grease to the bulb.
     
  3. Snaggerbob

    Snaggerbob In Second Gear

    Messages:
    35
    Location:
    Nokomis, Illinois
    Thank you, I'll do that.
     
  4. 1978GT

    1978GT In Fourth Gear GOLD MEMBER

    Messages:
    452
    Thanks, and please don't call him Amber. Or Shirley.
     
    Jeff B and beerbelly like this.
  5. beerbelly

    beerbelly In Maximum Overdrive SILVER MEMBER

    Messages:
    4,001
    Location:
    Portland OR
    iu.png
     
    Jeff B likes this.
  6. Snaggerbob

    Snaggerbob In Second Gear

    Messages:
    35
    Location:
    Nokomis, Illinois
    The drivers side socket had a lot of corrosion. I cleaned it out and added the grease. should be good.
     
  7. Jeff B

    Jeff B In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,570
    Location:
    SoCal
    Great. As you have time, visit the other sockets too. Check the grounds and the side markers as well and everything will work/flash like it should.
     
  8. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    13,030
    Location:
    Seguin, TX
    I had to replace my front sockets, as both original lenses let in water. I *think* I still have at least one package that gives the part number. I'll take a look.
     

Share This Page