Updated parts for sale 72-76 Ranchero/Torino

[gpd294]

As I have been working on my restoration I have been able to acquire a few parts that I will not be needing for my project. Below is what I have thus far for a 72-76 Torino, Gran Torino, or Station Wagon including the Squire and Ranchero. Everything is selling at a very reasonable price due to I would rather someone benefit from these parts on their project rather than they end up in storage or worse, in the trash.

1) Complete set of Squire "wood panel" moldings for a 73-76 Gran Torino Squire Wagon

2) Grill surround for a 74-76 Torino/Ranchero ( OK shape )

3) Set of Chrome grill bars minus center bar (Good shape)

4) Turn signal Marker lights for 74-76 (Good shape )

5) Pass. Side Interior door panels for a 72-76 4DR or Wagon, Ginger in color (Good shape)

6) 5 hole Instrument Bezel (Great shape)

7) Dash Plaque (Slight chip, but OK)

8) Pass. side wide moldings for fender and door. Fender moldings fits all models 72-76

9) Misc clips and fasteners

10) 74-76 Torino/Ranchero body Part ID numbers (Approx 11 pages w/ illustrations)

Here is a link for the photos if anyone in interested. Thanks.

http://www.kodakgallery.com/ShareLanding.action?c=zovqivs.94uie4a4&x=0&h=1&y=pdmf2c&localeid=en_US&cm_mmc=site_email-_-site_share-_-core-_-view_photos_button

[75 Squire]

Is the gauge cluster a standard cluster or GT?

[Dan the ranchero man]

Is the gauge cluster a standard cluster or GT?

Based on the photos of his parts the bezel is a standard instrument cluster.

[gpd294]

That is correct. It is the standard 5 hole bezel. Just FYI it is the one that came out of my Squire wagon. It has a woodgrain metal insert that I cleaned and painted with textured paint. I was going to use this one on my restoration, but was able to find another one that already has the black textured look from the factory. Both are restored now, but I am keeping the factory FORD textured one for myself.

If you are still intersted in the Squire one just let me know and I will send ya more detailed photos. Thanks.

[bigears]

Hi there - Grill surround for a 74-76 Torino/Ranchero ( OK shape )
Do you still have it? ................

[gpd294]

Sorry Bigears, Yes I still have the grill surround. It is in ok shape. It does have a few dings here and there, but still in good shape. Send me an email address and I'll get you some more detailed photos. Thanks.

[bigears]

Sorry Bigears, Yes I still have the grill surround. It is in ok shape. It does have a few dings here and there, but still in good shape. Send me an email address and I'll get you some more detailed photos. Thanks.

Cheers andy@ihug.co.nz

[Oakley]

Hello,

I am in need of the window riser guides, do you have them?

[aussiesmg]

I need the passenger door glass, shipping to 45832.

[Dan the ranchero man]

I need the passenger door glass, shipping to 45832.

the wagon glass would be the same a 4 door (too small for ranchero)

[gpd294]

Sorry Guys, I have been pretty busy, but when I went to look at the grill surround one of the tabs is now broken off. I don't know if it was the kids, the wife, or the critters, but either way it's damaged. Sorry.

Also I don't have any glass or window riser guides.

[pop838]

I need the sun visor pin bracket. It is the part in the center that holds the visors in place. If you have it, how much to get it to Heber Springs, AR 72543?

David

[redchuckb]

Hello,How much for the side mouldings for the Squire?

[redchuckb]

I was wondering if the mouldings were any good and,if they are,how much would you be asking?

[gpd294]

Pop, sorry I don't have this piece, but Dearborn Classics reproduces them if you can't find one in a salvage yard or Ebay.

Red, I still have the moldings minus the front passenger side. The driver's side moldings are in very good shape except for the fading as is teh tailgate piece. There are no dents, etc. The passenger sides are dented some due to a previous side swipe, but make me an offer and I'm sure we can come to an agreement. I'd rather someone use them on their project than risk them getting damaged in storage.

Here is a link to my wagon restoration if you would like to see the moldings when they were on the wagon.

http://www.stationwagonforums.com/forums/showthread.php?t=2886

Thanks for your interest.

[redchuckb]

Sir,I need the left front fender for sure and anything else you could spare.Most of mine is there but not sure how easy it will come off when ready for paint.Would like to see pictures and discuss price.My e-mail is cbarker1954@live.com.Thanks,Charlie

[gpd294]

Email sent Red.