I just installed the C4 transmission back into my '73 Ranchero 500 only to discover the the new bell housing does not have mounting holes for the...
Thanks, I never heard that term before.
:confused:I'm not sure what that means:confused:
I would not be surprised with it being a 1979 to have a 2.45 or 2.75
I have not forgotten about you and the hood. Are you going to be around next weekend?
It looks like you have made great progress in one year.:cool:
I pulled the engine back out and found that the converter had backed out, I reinstalled it and the engine mounted right up, I bolted it up,...
All of the flexplates that I have are 164 teeth and all will bolt up to torque converters that I have(c6,c4,FMX) the only difference that I can...
I am still getting mixed information on these Flexplates. I have contacted several parts suppliers and transmission shops and received different...
When I pulled the Flexplate from the '73 Cougar with 351C and C6 there was not a "load spreader" spacer where it bolted to the crank, but when I...
How likely is it I damaged the Pump? Is there a way I can tell from the outside?
I found this information on another site.
California is going to allow year of manufacture license plates to be utilized on vehicles 1969 and...
Someone cut them to install round speakers on the surface of the panels.
So, I either have to pull the engine out again or back the transmission out and reposition the Torque converter again?
They are not mine, I only posted the ad. link to the site.
click on the link for seller information.
Sorry, I do not have any extra myself, at...
It is the same converter and flexplate that was originally on it. Torque converter was never removed from the transmission and transmission was...
Separate names with a comma.