5/2/21 Sorry all for the hiatus from this post . Anyone who asked for anything in the past and its still looking let s start over . I Have a passion to clean out my shop , I will monitor this daily from here on out. If you ask if i have something I will respond with pics if I have it __________________________________________________________________ Now that i am on the backside of my restoration i have alot of stuff i need get rid of . I dont think i will have any desire to setup an ebay account . bumper brackets , splash shields, front coil spring covers. hood latch parts, bed trim . instrument cluster with a tach (1969). Bench seat and bench seat hardware. I also have a a cowl panel i bought that i didnt use . I separated the upper and lower sections cleaned it up and primed it . Front deflector . On and on. If you hare hunting down any parts for a 68-69 let me know . I am located in Western Washington . At this point if you are looking for something specific ask here I will let you know if i have it. And we can go from there . Maybe one of these days i will compile a list .
Here comes some pictures of the Stuff i got . More to follow 1968-69 Drip rails one is tweaked but no creases Complete front windshield trim 68-69 Ranchero Collapsible steering column with some mounting hardware 1968-69 cowl panel i bought this early on didn't ending up using it. I separated it to clean it and paint it 1968-69 ranchero door caps left and right Stainless steel bed trim left and right these have holes drilled in them for a tie off cleat that was mount on them Top and side complete both sides 1968-69 Ranchero rear glass trim I do have a bottom also I am hanging on to because the on on the car is kind of fuggly and i am hoping to rework one set to be better .
Assuming there is supposed to be a trim piece here above the doors , do you have both sides for a 69? See pic.
The pad you have looks like the ones on my both my 70s and my 71. I picked one up on ebay without to much waiting.
I don't know much about these; is the center section changeable? If so, maybe one of these would work? https://www.macsautoparts.com/ford_...-wheel-horn-pad-2-spoke-1970-1973-476333.html https://www.autokrafters.com/p-2266...lane-71-74-comet-more-2-spoke-d0az-3623a.aspx
ya i have 2 of those one is i n good shape the other one i think is ok but i need to clean it up to see. both are black
Yes... GT package, but probably more because of the 428CJ under the hood. Mine also came with a clock, in the fourth port.
Yes Its sliver with a tach Sorry all trying to catch up on PM's and questions . This post went from Dead to alive I was almost ready to go to the dump