Headlight decal, Good call!

Discussion in 'Ranchero Pics' started by airford1, Jun 24, 2014.

  1. airford1

    airford1 In Maximum Overdrive

    Messages:
    1,396
    Check it out thanks 5.0

    DSCN1798.JPG
     
  2. airford1

    airford1 In Maximum Overdrive

    Messages:
    1,396
    Had to split it in 10 places to lay flat on the curved surface, But it looks good.
     
  3. airford1

    airford1 In Maximum Overdrive

    Messages:
    1,396
    Her's what's hiding behind the decal.

    DSCN1799.JPG
     
  4. HuevosRanchero

    HuevosRanchero In Maximum Overdrive

    Messages:
    5,773
    Location:
    Macon Georgia
    looks great!
     
  5. ribald1

    ribald1 Banned PLATINUM MEMBER

    Messages:
    19,727
    Location:
    California
    Looks good.
    I was surprised to see the breather on the valve cover.
    Aren't you running an exhaust vacuum system?
     
  6. airford1

    airford1 In Maximum Overdrive

    Messages:
    1,396
    Yes , but without the breather the motor pukes drops of oil from the real main seal.
     
  7. eqshadimar

    eqshadimar In Overdrive

    Messages:
    549
    Location:
    Austin - TX
    Looks great!

    Laters,
    Jeff
     
  8. ribald1

    ribald1 Banned PLATINUM MEMBER

    Messages:
    19,727
    Location:
    California
    Maybe one of the one way valves on your pan-evac system isn't working. Have you ran it with a vacuum gauge? It sure sounds like you are getting crankcase pressurization.
    The breather virtually defeats the pan-evac system, turning it into a complex breather system.
     

Share This Page