1972 -73 SPORT CLUSTER CIRCUIT BOARD ,remake MADE IN NEW ZEALAND

Discussion in 'Ranchero Parts For Sale' started by andrewok1, Apr 20, 2018.

  1. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    Neill .
    Has recieved the Sport Cluster , HE HAS ALREADY STARTED ON THEM , price is $ 145.00 + 15 shipped
    If you want to get one of them EMAIL Me =andrewok94@gmail.com
    [​IMG]
     
    LSChero likes this.
  2. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    I basic layout is done for now. I will have this made as a 'mech' which is just as it is in this picture without copper and mask. I will use it to test the fitment on the cluster frame.

    [​IMG]
     
  3. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    the Sport Cluster Circuit are selling fast the torino guys have bought 15 of the 20 planed to make /we still have a few regular circuits
     
  4. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    17 of the 20 are spoken for 3 sport cluster circuits unspoken for ,we also have a few regular cluster circuits as well
     
    TestDummy likes this.
  5. FordR500GT

    FordR500GT In Maximum Overdrive BRONZE MEMBER

    Messages:
    1,343
    Location:
    El Paso, TX
    Way to go ANDY
     
  6. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    I have received the mech. It was a very close fit, put not quite perfect.

    While it was fitted to the frame I cut it into 4 pieces and joined it with sticky tape. Then I went around all the edges with a black felt pen so it would scan well, here is the result:

    [​IMG]

    Then I had to hack up the scan of the original circuit to fit the new shape. The differences are subtle, put it will make the fit perfect:

    [​IMG]

    Now I can start tracing. So far I've done the mask:

    [​IMG]

    This is where it is at right now, finished 'board', finished mask just a lot of copper tracing to do:

    [​IMG]
     
    andrewok1 likes this.
  7. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    SUPERB WORK !!!!!!
     
  8. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    I am goin to hold one of each for you as promised till your ready FordR500GT
     
    FordR500GT likes this.
  9. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    14,015
    Location:
    New Braunfels, TX
    When will you be ready for the use of my printed circuit?
     
  10. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    Been flat out with work and doing that sort of stuff you need to do around home with Winter approaching. Hoping to have it close to finished by the end of the coming week. Kocked out a bit tonight:

    [​IMG]
     
  11. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    Handy , after these sport clusters next is the 74-76 sport ,so i would say if you have a old circuit for the 77=79 closer to the end of the year November ,
    THANKS FOR REMINDING ME YOU CAN SUPPLY ONE FOR THESE , ANDY
     
  12. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    FANTASTIC work Neill ,
    as of now we have SOLD everyone of the sport circuits 20, still have a few basic 72-73 cluster circuit
    ANDY
     
  13. handy_andy_cv64

    handy_andy_cv64 In Maximum Overdrive SILVER MEMBER

    Messages:
    14,015
    Location:
    New Braunfels, TX
    I'll put a couple reminders on in September, it likely should be sent in October.
     
  14. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    Progress. May not look like much but over half way done:

    [​IMG]
     
  15. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    Artwork is complete. Will be ordering Monday:

    [​IMG]
     
  16. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    ALL SPORT CIRCUITS ARE SPOKEN 25 OF THEM , ONE MEMBER OF RANCHERO SITE ORDERED - TYGR 1 RICHARD , FORD 500 GT , HAS 1 OF EACH ON HOLD
     
  17. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    There was a delay in the production but I have now taken delivery of the circuits. cut them out, attached the rivets and inspected them. I will be sending them to Andy tomorrow, Tuesday May 29th. I ran out of daylight to take photos today. I'll take some better photos on Friday. In the meantime here is a not so good indoor photo:

    [​IMG]
     
  18. NeillNZ

    NeillNZ In Second Gear

    Messages:
    35
    Location:
    New Zealand
    I have kept one back here to take photos and I got around to it today:

    [​IMG]

    [​IMG]



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    FrenchFan and Hillbilly like this.
  19. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida
    We have 4 Sport Circuits still available AND 3 BASE MODLE WITH OUT TACH
     
  20. andrewok1

    andrewok1 In Maximum Overdrive GOLD MEMBER SILVER MEMBER

    Messages:
    3,996
    Location:
    ocala ,florida

Share This Page