Thanks Adrewok1! J.C.
Thanks ribald1 and all! I've rehabbed the felt stabilizer pads. As for the plastic guides, I'm not sure I would recognize acceptable wear as...
Hi: Anyone have first hand knowledge regarding tricks of the trade in adjusting the glass to properly seal.? I've replaced the window seals and...
Thanks. JC
Hi: Has anyone done an actual lay over comparison between 72 - 76 and the 77-79 door glass? If so, what did you find? Thanks J.C.
P.S. Further, the face of the gauge has some plastic melted over the lip of the metal case preventing the gauge from being disassembled. Short of...
Sorry - I hit the send before finishing. I have had the cluster disassembled with all the gauges removed to paint the case interior white and...
Hey Andy: Thanks - I appreciate the effort! J.C.
I'm not sure either, but common sense says a stop peg would have to be that substantial. Also - the balance of the gauges do not have any obvious...
Sorry - I'm skeptical of it simply being a needle stop. If it were, I'd expect it to be just a plastic post. This is steel, threaded and milled...
Yea, this isn't a plastic tab. Below is a picture of a gauge with the post I'm speaking of. It looks suspiciously like an adjustment. Anyone?
In cleaning up my 74 gauge cluster (w / large speedometer & Tach, plus 4 small gauges and clock) the Oil Pressure gauge has a small threaded post...
Hi: Anyone know of a source offering a bed mat for my 72 Ranchero? Thanks JC
Hi All: First - thanks for the guidance and options. Handy Andy: As for the thought of the rheostat being wimpy. My belief is the dimming...
First - thanks for the prompt replies! Speedo and its face are fine, but in effort to improve the quality of the instrument lighting. I've...
Hi All: Concerning my 72 with the gauge package containing a large Tach and Speedometer, plus 4 smaller gauges and clock. It appears the over...
Separate names with a comma.