Thanks!! Just bought one.
Rebuilding my a/c system. Anybody know of a source for a direct fit dryer for the '70? Also, a source for new hose o'ring. Thanks
Torino/Ranchero shifter assy with floor support and shift rod. Needs shift rod seal. Has switch and selector light. Great shape for it's age....
How about the wide rocker molding behind the rear wheels. Thanks
What is the temperature that corresponds to the low & high marks on the temp gauge? '70 351C, 4V Thanks
Thanks for the inputs. Will try both places. Hal
Need a recommendation for a new temp sensor for a '70 351C. Thanks, Hal
Hi all: Thanks for the inputs. I'll start from the tank and work forward & see what I find. Hal
Installed a rebuilt 351M with a new Carter M6882 about a year ago. Car sat while doing body/paint and other work-started car occasionally (run 5...
I need to install an electric fuel pump in my 351c equipped '70. Looking for a recommendation for a brand (model no.) and installation location....
rocker molding Hi: Looking for the rocker molding for a '70 that goes behind the rear wheel. Style is shown in the attached picture. Molding...
wire shields Thanks for looking. I need them to be at least 38" to fill the entire length. If I read the parts list correctly, the stock ones...
Need a good pair of wire shields for my '70. Must be at least 38" long. Thanks.
Use the soft tape and measure around the outside of the pipe. Divide the measurement by 3.14 to get the diameter. :)
Did the '70 GT have a "Parking brake on" switch? I see a window for it in the cluster but no evidence of a mounting bracket or wiring at the...
Need the following so I can put the dash pad back: 13150 buzzer Wire harness (15A856 assy) between the buzzer and the 10C838 relay (including...
Need a transmission tunnel cover for my 70 so I can change my column shift to a floor shift. I have a shifter assy from a 72 torino. Any leads...
Will any other year Torino or Ranchero cluster fit in place of the factory cluster in a '70. I would like to upgrade with round gauges. Thanks, Hal
Does anyone have an interchangability list for the front and rear wheel lip moldings for a '70 or '71? Lots of moldings out there but don't if...
Does someone have the part number for the rear wheel lip molding for a '70 or '71. Is it the same for the torino station wagon? Thanks, Hal
Separate names with a comma.
